Price of House Construction per Square Meter: “How much does it cost to build a turnkey house?”
In the table, we have provided the estimated cost of house construction based on the required types of work, calculated per square meter.
Show price in BYN(Br) USD($) RUB(₽) EUR(€)
|
Types of work We provide both comprehensive services and individual types of work (for example pouring the foundation) |
Pouring the foundation от 60 $ for m3 1 3;недели | |||
| Box at home | Warm contour | For finishing | Turnkey house | |
| from290 $ for m2 | from560 $ for m2 | from780 $ for m2 | from950 $ for m2 | |
| 2-3 months | 3-4 months | 4-6 months | 6-8 months | |
| BUYING A LAND | The customer can receive advice at the stage of selecting a land plot. | |||
| GEOLOGICAL SURVEYS |  |
|
|
 |
| GEODETIC SURVEYING | |
|
|
|
| HOUSE PROJECT | |
|
|
|
| EARTHWORK | |
|
|
|
| FOUNDATION | |
|
|
|
| SUB-FLOORS | |
|
|
|
| EXTERIOR WALLS | |
|
|
|
| COLORS | |
|
|
|
| PARTITIONS | |
|
|
|
| INTERNAL STAIRWAY | |
|
|
|
| RAFTER SYSTEM | |
|
|
|
| ROOF | |
|
|
|
| WINDOWS, BALCONY DOORS | |
|
|
|
| EXTERIOR DOORS | |
|
|
|
| FACADE INSULATION | |
|
|
|
| EXTERIOR FINISHING OF FACADE | |
|
|
|
| ROOF EVE FITTING | |
|
|
|
| DRAINAGE SYSTEM | |
|
|
|
| SNOW RETENTION | |
|
|
|
| GARAGE DOORS | |
|
|
|
| ELECTRICAL INSTALLATION WORK | |
|
|
|
| PLASTERING WORKS | |
|
|
|
| HEATING | |
|
|
|
| WATER SUPPLY | |
|
|
|
| SEWER | |
|
|
|
| VENTILATION | |
|
|
|
| FINISH SCREAD | |
|
|
|
| BOILER ROOM | |
|
|
|
| FINAL FINISH | |
|
|
|
| INTERIOR DOORS | |
|
|
|
| FENCE | |
|
|
|
| BLINDBOARD | |
|
|
|
| IMPROVEMENT OF THE SITE (on request) | |
|
|
|
* - The final cost of building your house is determined after a preliminary calculation based on the project and taking into account current prices for building materials.
** - The table shows approximate construction times for a house with an area of 100 to 150 square meters. m2
If you are interested in certain types of services, for example: turnkey foundation, masonry work, roof installation work, call +91 29 9324 2297, if you are interested The cost of a finished house in India.
Rates for construction work calculated per square meter or cubic meter offer only a general understanding of the anticipated costs involved in building a house.
When calculating the total cost of building a turnkey house, not only the volumes of individual types of work are taken into account, but also several other factors, such as:
If you already have a plot of land and a project, we can arrange for a specialist to visit your site for a detailed assessment of the site’s features and a better understanding of the scope of work.
The exact cost of construction work, as well as the price for pouring the foundation, is determined based on the calculations made after receiving a request and clarifying comprehensive information about the location of the plot and the characteristics of the project.
Calculations can be made for individual types of work (such as foundations, wall masonry, roofing) or as a comprehensive estimate for the entire project.
The table shows approximate prices for the work, excluding the cost of materials.Current prices depend on the project, please call for details +91 29 9324-2297.
Show price in BYN(Br) USD($) RUB(₽) EUR(€)
| pile-grillage foundation | strip foundation | slab foundation | prefabricated foundation made of FBS blocks |
| for 1 m/p | for 1 m3 | for 1 m3 | for 1 block |
| from 25$ | from 65$ | from 60$ | from 8$ |
| gas silicate blocks | expanded clay concrete blocks | brick | reinforced concrete structures |
| for 1 m3 | for 1 m3 | for 1 m3 | for 1 m3 |
| from 16$ | from 16$ | from 55$ | from 65$ |
| gas silicate blocks (up to 200mm) | expanded clay concrete blocks (up to 200mm) | brick KO (up to 120mm) | brick KPU (up to 120mm) |
| for 1 m2 | for 1 m2 | for 1 m2 | for 1 m2 |
| from 7$ | from 7$ | from 12$ | from 12$ |
| Hollow core slabs | Wooden beams | Reinforced concrete structures | I-beams metal |
| for 1 pcs. | for 1 pcs. | for 1 m2 | for 1 pcs. |
| from 12$ | from 12$ | from 22$ | from 30$ |
| Metal tiles | Composite tiles | Soft roofing (flexible bitumen shingles) | Seam roofing |
| for 1 m2 | for 1 m2 | for 1 m2 | for 1 m2 |
| from 15$ | from 17$ | from 16$ | from 16$ |
| Mineral wool(basalt stone wool) | Foam plastic (expanded polystyrene) |
| for 1 m2 | for 1 m3 |
| from 5$ | from 5$ |
| Types of decorative facade plasters | ||
| Cement / Acrylic / Silicone | mineral | |
| varieties of textures of decorative facade finishing | ||
| "Kornik" (pebble, cereal), "Bark beetle"(rain, lamb, Christmas tree), "American" | "Fur coat" | "Bayramix" |
| from 5$/m3 | from 4$/m3 | from 8$/m3 |
*- Prices in foreign currency are indicated for reference. All payments are made in Belarusian rubles in accordance with the legislation of B.
The estimates provided are approximate rates for the work performed, excluding the cost of materials.
For current prices tailored to your project, please inquire by phone at +91 29 9324-2297.
Show price in BYN(Br) USD($) RUB(₽) EUR(€)
| Type of equipment | Price |
| Truck crane | 25$/hour |
| Concrete pump | 40$/hour |
| Backhoe loader | 30$/hour |
| Dump truck | 18$/hour |
| Wall formwork | 4.5$ per square |
| Formwork for floor slabs | 7$ per square |
| Foundation formwork | 4.5$ per square |
| Front loader | 28$/hour |
| Vibrating plates | 15$/day |
*- Prices in foreign currency are indicated for reference. All payments are made in Belarusian rubles in accordance with the legislation of B.
This calculator allows you to estimate the very approximate cost of the future house. You need to specify the approximate width and length of the house in meters, the number of floors, the presence of an attic and basement, as well as select the configuration.
The precise cost of construction is established based on a detailed calculation after reviewing the project documentation, understanding the characteristics of the property, and gathering essential information about the location and site specifics. For an exact cost of the work, please contact us at +91 29 9324-2297.
Home cost calculator
In addition to the main costs of building a house, there are also a number of preparatory works, the costs of which must be taken into account before construction begins.
Construction of a house made of aerated concrete should begin with four preparatory stages:
Purchasing a Plot
Engineering and geological surveys are a crucial step in the preparation for the design and construction of a private house. Understanding the geology of the site is essential for making an informed choice about the type of foundation and calculating its load-bearing capacity.
Without geological surveys, the foundation's load-bearing ability may be insufficient, especially if it rests on weak or unstable soils.
In order to select the optimal foundation option at the design stage and calculate its bearing capacity, you need to know the nature of the soil, their physical and mechanical properties, and obtain data on the groundwater level. It is important to understand that there are different types monolithic foundation for a house, for example: strip foundation, slab foundation, pile-grillage foundation, USHP foundation, there is also another type, for example pile-screw foundation.
Very often, during construction without a design and without geology, it is necessary to unjustifiably overestimate the bearing capacity of the foundation, which leads to a significant increase in cost pouring the foundation.
When you order geological surveys, there are a number of factors to consider:
When conducting geological surveys, the following types of work are performed::
For a private house, as a rule, 2-4 wells are made, with a depth of 5 to 15 meters.
The approximate amount of work, based on the number of storeys of the house and the size of the foundation, is indicated in the table below:
| Number of floors | Ground floor | Estimated foundation size | ||
| 10 on 10m | 15 on 15m | 20 on 20m | ||
| One-story house | No | 2 wells 5-10 m | 3 wells 5-10 m | 4 wells 5-10 m |
| One-story house with a basement | Yes | 2 wells 8-10 m | 3 wells 8-10 m | 4 wells 8-10 m |
| Two-story house | No | 2 wells 8-9 мm | 3 wells 8-9 мm | 4 wells 8-9 мm |
| Two-story house with a basement | Yes | 2 wells 8-15 m | 3 wells 8-15 m | 4 wells 8-15 m |
| Three-story house | No | 2 wells 8-12 m | 3 wells 8-12 m | 4 wells 8-12 m |
Approximate location of wells depending on the size of the foundation:
10 on 10m
15 on 15m
20 on 20m
The cost of engineering and geological surveys depends on a number of factors:
The cost of engineering and geological surveys for a private house in the total cost of construction is less than 1%, but it allows you to save when pouring the foundation and avoid big problems in the future. It is especially beneficial to do geological surveys when you have a large building area, since the larger the expected foundation area, the more you can save on construction when choosing the optimal type of foundation.
A geotechnical survey report allows you to save on work and construction materials, since there is no need to make a foundation with a large margin of safety.
If you want to know the cost of engineering and geological surveys, leave a request:
LEAVE A REQUEST for geological surveysTopographic survey (geodetic survey) is needed to mark the boundaries of the site, remove the boundaries and plant the foundation of your private residential building on your specific area of terrain and relief, accurately recording the distance to the neighbors' plots, utilities, roads and driveways.
This type of engineering survey will help at the design stage to correctly plan the site for drainage of rainwater and indicate the exact distance to ground utilities and underground networks. Topographic survey allows you to calculate the dimensions of the foundation pit for a house, the height and geodetic mark of the base, and correctly estimate the volume of earthworks (where to choose soil and where to sprinkle), which reduces the cost and reduces the volume of earthworks.
The result of topographic surveys is a drawing of your site on a scale, usually 1 to 500 (five meters in one centimeter), on which the relief characteristics of a given site, such as site boundaries, elevations, and slopes, are recorded and shown using certain symbols.
Topographic survey is especially relevant for areas with complex terrain.
If you want to know the cost of topographic survey, leave a request:
LEAVE A REQUEST
Project drafting specialists often do not fully understand the nuances and aspects of construction, and therefore end up assuming the complexity of choosing materials and the use of expensive and complex solutions in the implementation of design solutions. Our consultations at the design stage, as well as an audit of an already insignificant project, often allow us to reduce the final cost of construction through the use of the most optimal solutions.
If you are planning to order a project, or you already have a ready-made project, leave a request, we will contact you and discuss all the details and nuances of your project:
LEAVE A REQUEST for a house projectA house project is a set of documentation and a collection of drawings required to obtain permits and carry out the construction of your house or cottage. It is developed by professionals in the field of design, taking into account the requirements of building codes, technical regulations, state standards, and the specific construction norms applicable in the Republic of Belarus. The project contains detailed information about the building's characteristics, its exterior appearance, interior layout, structural solutions, and construction technologies.
Obtaining a construction permit - Before starting construction, it is usually necessary to undergo an approval procedure at local government offices. An architectural project is sufficient for this. Having the documentation allows you to obtain the required construction permit.
Increases construction reliability - A comprehensive house project includes load calculations for all load-bearing structures, helping to avoid critical loads during construction and operation of the building. Constructing without a project can lead to emergency situations, which may render the housing unsafe or necessitate expensive renovations.
Process control – Having a project enables the client to compare the work done by contractors with the project documentation. Without a project, one would have to rely on contractors' opinions, which are often not backed by any calculations.
Allows for payment schedule forecasting – You will know exactly when and how much money you will need at each stage of the work.
Reduces material storage duration – The project helps determine the required amount of materials for each stage of construction, avoiding additional issues related to organizing storage spaces and protecting materials from cold and moisture.
Increases the likelihood of future resale – In the country real estate market, houses built according to a project are valued higher than those built without one. Potential buyers prefer properties that meet safety standards. They appreciate clarity about the locations of key engineering networks and communications within the home and have confidence that they won't damage electrical wires or heating pipes when they decide to hang a shelf on the wall.
Saves money - design documentation allows you to use optimal design solutions, which leads to savings in materials when there is no need to include an excessive margin of safety in building structures.
Accurate assessment of the construction budget - the project provides the necessary information about the volume of planned work, materials used, equipment and technologies. This information allows you to create an estimate and calculate the cost of various этапов строительных работ.
Simplifies logistics - it is much easier for builders to plan the frequency of delivery of materials to the site, which significantly reduces the cost of delivery and speeds up the work itself, since it does not lead to downtime and delays from schedule due to lack of materials.
Saves nerves - you get what is drawn, or what the creative builders came up with. When you have a project in hand, the builders understand what you would like to receive at the end of construction, this reduces to zero the number of potential conflicts and misunderstandings arising from oral, not recorded agreements and wishes.
Facilitates repairs and changes - sooner or later any house has to be repaired. During the operation of the building, you may want to make some changes to existing engineering systems and networks. It is much easier to do this when you have a house project that contains diagrams and drawings of utility lines. The project will help you figure out how to make the required changes in the most predictable and safe way.
Simplifies the connection of networks - facilitates the process of connecting to central networks of electricity, gas supply, water supply, sewerage.
Allows commissioning - a house project is necessary for registering real estate, obtaining a property passport and putting the house into operation.
In this case, there are only 2 questions:
Question 1: Will the desire to save money and construction on such a project lead to big problems in the foreseeable future?
Question 2: Who will be responsible for possible problems if there were significant design errors or shortcomings in the project?
If you did not pay for the project, but found it on the Internet, all responsibility for the construction of this project lies with you, and you also need to take into account that making changes to such a project will be quite problematic.
If you are building a room for storing garden tools, some small outbuilding, this option may suit you, but if we are talking about building a private residential building, when construction involves investing a significant amount of money, and the cost of a mistake is very high, the design question is better entrust to professionals. Without the necessary knowledge and experience, creating a house project from scratch on your own, taking into account all the design features, is a very difficult and time-consuming task.
What does project documentation consist of, and what are the project sections:
The architectural project contains:
At the stage of approving construction, obtaining a developer’s passport and starting construction, as a rule, a project at stage A is sufficient. (architectural solutions).
The project is at stage (constructive solutions) in most cases fully pays for the cost of design work already at the stage of pouring the foundation, by choosing the most optimal construction solution and reducing the amount of consumable building materials (reinforcement and concrete).
The construction project contains an important technical part for construction:
Some customers believe that it is not worth paying for the design of utility networks, since these networks can be drawn by hand. You need to be aware that when installing foundations, builders must remove all communications that are located under the floor of the first floor, and if any mistakes are made at this stage, then the entire subsequent arrangement of plumbing fixtures will depend on this mistake.
The lack of a utility network project makes itself felt most often after the finishing touches of the premises are completed, when the customer suddenly realizes that in some places there is not enough socket, Internet connection point or heating device. Correcting such errors after the final finishing process is quite expensive and frustrating.
Good designers, at the stage of creating utility networks when developing an individual project, will take into account various small nuances that you are unlikely to think about (down to where you will have a Christmas tree for the New Year, and exactly how the socket for connecting Christmas tree lights will be located).
Estimate – is a calculation of the cost of construction, and is necessary for:
Estimates vary:
Summary estimate - needed to understand the full cost of all work on the site, including the costs of site preparation, construction of temporary buildings and utility networks, costs of materials, construction and installation work, costs of inventory, tools and equipment.
Object estimate - represents a calculation for the entire object, by summing up local estimates.
Local estimates – take into account costs for individual types of work.
List of resources - displays the required quantity and cost of resources in base and current prices that are necessary to complete the required amount of work (quantity of materials, operating time of machines and mechanisms, labor intensity, necessary equipment)
Calculation of forecast indices - to bring the basic cost of work to current prices.
Construction of private houses and cottages without a project, unfortunately, is not uncommon and very often results in the following unpleasant consequences:
Cracks in walls, foundations, distortions and collapses - all these are consequences of the lack of the necessary calculation of the required load-bearing capacity of building structures.
Overconsumption of materials and rise in cost of the construction project - due to the lack of accurate calculations, errors are made in choosing the type of foundation, and an excessive reserve of bearing capacity is laid, which increases the consumption of construction materials materials
Lack of clear terms and costs of construction - without an estimate and a detailed understanding of the scope of work, it is difficult to plan costs and develop a work schedule.
The estimated cost of project documentation is indicated in the table below:
| Typical project | Typical project with edits | Individual project | |
| Architectural project (stage A) | from 190 rub | from 600 rub | from 900 rub |
| Construction project (constructive solutions К) | from 900 rub | from 1400 rub | from 1500 rub |
| Project of engineering networks (for one section) heating and ventilation or water supply and sewerage or electricity | from 300 rub | from 600 rub | from 600 rub |
Remember that the amount of savings if you abandon the project is not commensurate with the possible financial risks that may arise due to the use of incorrect design solutions or errors during construction.
Construction without a project is a huge risk when you can lose a much larger amount at the stage of eliminating errors and shortcomings, cracks in foundations and walls that arise during the operation of such facilities built without projects.
When ordering construction from us you will receive
Our кconsultations at the project development stage, as well as analysis and audit of a completed project, allow us to reduce construction costs through the use of more effective solutions.
Request a free audit of your project.
Designers Not everyone is fully aware of the intricacies of the construction process, which leads to errors in the choice of materials and the implementation of complex and expensive technical solutions. solutions.
Turnkey construction of a two-story house
Construction of a two-story house on a site with difficult terrain
Construction of a guest house in one season
Construction of a two-story cottage box within one construction season
Construction and insulation of a block house
Construction of a two-story house made of expanded clay concrete
House frame made of expanded clay concrete blocks
An example of the construction of a two-story house made of expanded clay concrete blocks
From foundation to interior finishing
